back to audiorentclair.com

Audio Technica ES935 Condenser Microphone
Audio Technica ES935 Condenser Microphone
Audio Technica ES935 Condenser Microphone
Audio Technica ES935 Condenser Microphone

Audio Technica ES935 Condenser Microphone

Regular price
SFr. 70.00
Sale price
SFr. 70.00
Unit price
per 

Alle Preise zzgl. 7.7% MwSt

All prices excl. 7.7% VAT

 

Aufgrund starker Nachfragen zu den Artikeln, bitte Verfügbarkeit vor der Bestellung bei usedgear@audiorentclair.com anfragen!

-----

Due to strong demand for the items, please contact usedgear@audiorentclair.com before ordering for availability!

 

Designed for high-quality sound reinforcement in a super-compact design, the small-diameter, 7.52”-long gooseneck delivers flexible positioning with a sleek, low-profile appearance. Its integral power module requires 11-52V DC phantom power. The mic’s low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. It is equipped with a recessed switch that permits low-end roll-off for reduction of low-frequency ambient background noise.

 

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -40 dB (10.0 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 138 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 109 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
SWITCH Flat, roll-off
WEIGHT 3.2 oz (92 g)
DIMENSIONS 7.52" (191.0 mm) long,
0.33" (8.4 mm) head diameter,
0.74" (18.9 mm) base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type

 

 

 

 

  • These mics have been tested and all are in good working condition.
  • Comes with mic clip
  • Please note that the photos shown are representative of the units we have for sale and are not necessarily of the exact unit you'll receive.